Portable Mobile Phone Breaker/Jammer/Isolator
Product Description
Detailed Selling Lead Description
Specifications:
TX frequency: CDMA/GSM, 860-970MHz; 3G, 2, 110-2, 170MHz
DCS/PHS, 1, 805-1, 930MHz
Available system
Include analog (AMPS, TACS, NMT) and digital (GPRS, GSM, DCS, CDMA, PDC, TDMA, PHS, PCS, IDEN, W-CDMA, UMTS)
Single output power
+25dBm / 500mW
Power input: AC 110V-240V
Power output: DC 8V 1, 500mAh
Jamming range: Radius 0.5 - 15m
The cellular signal must less than -85dBm in the location
The jamming radius still depends on the strength signal in given area
Safety regulation
AC Adapter UL (E190582)
CSA (LR112971 Level 3)
Dimensions: 100 (L) x 57 (W) x 22 (H)mm not include antenna
Weight: 180g
Temperature: -40 to +55 Celsius degree
Relative humility: Less than 90% (RH)
Air pressure: 86~106kPa
Packing:
Colour packing
Notices ◎The frequency ranges shown are only an example, some of the frequency ranges that are available. State that the Jammer can be configured for all cellular systems and frequencies worldwide!
◎Be sure to connect all the antenna first before the power supply is switch on. Please do not take off antenna when the machine is working.
◎Antenna shall be used vertical to the ground. working more efficiently.
◎Please don’t put the jammer in the water and fire to avoid using in the bad. Condition of over-wet. over-hot, high voltage and high magnetism.
◎If the jammer can not be charged or other unconventionality(i.e. The indicatior light doesn’t light up). please contact with the distributor in local place. Any refit and incorrect repair is not allowed.
◎Any ruin and disrepair caused by incorrect operation and disassembly will be excluded from the repair with free of charge. |
